13.160 振动和冲击(与人有关的) 标准查询与下载

GOST ISO/TS 15694-2015 振动和冲击. 手传测量和人体暴露评估. 单次冲击

Vibration and shock. Measurement of hand-transmittedand and evaluation of human exposure. Single shocks

GOST CEN/TR 15350-2015 机械振动. 使用机器振动信息评定手感振动暴露

Mechanical vibration. Assessment of exposure to hand-transmitted vibration using information on vibration emitted by machines

GOST R ISO 10068-2015 机械振动和冲击. 人体手臂系统的驱动点机械阻抗数据

Mechanical vibration and shock. Data on the mechanical impedance of the human hand-arm system at the driving point

KS B ISO 10068:2014 机械振动与冲击.人体手臂驱动点的机械阻抗

Mechanical vibration and shock — Mechanical impedance of the human hand-arm system at the driving point

KS B ISO 9996:2014 机械振动与冲击.人类活动性和功能失调.分类

Mechanical vibration and shock-Disturbance to human activity and performance-Classification

KS B ISO 13091-2:2014 机械振动.评定神经官能紊乱用振动感知阈值.第2部分:指尖测量分析和解释

Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 2: Analysis and interpretation of measurements at the fingertips

KS B ISO 5982:2014 机械振动和冲击.表征在垂直振动下人体对生物动力反映的理想值范围

Mechanical vibration and shock — Range of idealized values to characterize seated-body biodynamic response under vertical vibration

KS B ISO 5982-2014(2019) 机械振动和冲击 - 在垂直振动下表征坐式体动力学响应的理想值范围

Mechanical vibration and shock — Range of idealized values to characterize seated-body biodynamic response under vertical vibration

KS B ISO 5349-2:2014 机械振动.人体手传振动的测量与评估.第2部分:用于现场测量的实施指南

Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace

KS B ISO 8727:2014 机械振动和冲击.人控曝光器.生物动力坐标体系

Mechanical vibration and shock-Human exposure-Biodynamic coordinate systems

KS B ISO 2631-2:2014 机械振动和冲击.人体暴露于全身振动的评估.第2部分:建筑物内的振动(1Hz~80Hz)

Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings(1 Hz to 80 Hz)

KS B ISO 2631-2-2014(2019) 机械振动和冲击 - 人体暴露于全身振动的评估 - 第2部分:建筑物振动（1 Hz至80 Hz）

Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings(1 Hz to 80 Hz)

KS B ISO 5805:2014 机械振动与冲击.人体暴露.术语

Mechanical vibration and shock — Human exposure — Vocabulary

KS B ISO 6897:2014 固定建筑物特别是建筑物和海上结构的居住者对低频(0.063-1Hz)水平运动响应的评定指南

Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off-shore structures, to lowfrequency horizontal motion(0.063 to 1 Hz)

KS B ISO 5349-1:2014 机械振动.人体手臂传输振动的测量和评估.第1部分:通用要求

Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 1: General requirements

GSO ISO 10227:2014 人体/人体交替冲击（单次冲击） 测试和评估 技术方面指南

This International Standard defines technical aspects of experiments dealing with human or human surrogate testing and procedures for collecting and reporting biomechanical data. Recommended practices regarding measurements, instrumentation and reporting of results are outlined. These recommended practices are provided as guide for ease of interpretation and comparison of data among different organizations. This International Standard is limited to experiments involving indirect (inertial) impact and does not address direct impact with vehicle surfaces or the use of the airbag-type of active restraining device.

Human/human surrogate impact (single shock) testing and evaluation -- Guidance on technical aspects

GSO ISO 13091-1:2014 机械振动 触摸振动源并评估神经异常 第1部分：指尖的测量方法

This part of ISO 13091 specifies — methods for measuring vibrotactile perception thresholds (VPTs) at the fingertips, — procedures for conducting the measurements, and — the reporting of results. Measurement methods are defined in this part of ISO 13091 for obtaining perception thresholds at the fingertips mediated, separately, by SAI, FAI and FAII mechanoreceptor populations. The methods are designed to be applicable to healthy and diseased persons, and to be suitable for clinical assessment and for screening purposes. The measurement of temporary shifts in vibrotactile perception threshold, or of thresholds at body sites other than the fingertip, is outside the scope of this part of ISO 13091.

Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction -- Part 1: Methods of measurement at the fingertips

GSO ISO 13091-2:2014 机械振动 触摸振动源并评估神经异常 第2部分：指尖测量的分析和解释

This part of ISO 13091 specifies methods and procedures for analysing and interpreting vibrotactile perception thresholds and threshold shifts. Procedures for describing statistically significant changes in vibrotactile perception thresholds are recommended. This part of ISO 13091 is applicable to vibrotactile perception thresholds determined at the fingertips according to the provisions of ISO 13091-1. Values for the vibrotactile perception thresholds of healthy persons, applicable to thresholds determined according to the provisions of ISO 13091-1, are given in Annex A. The implications of observed changes in vibrotactile perception thresholds are considered in Annex B.

Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction -- Part 2: Analysis and interpretation of measurements at the fingertips

GSO ISO 13090-1:2014 机械振动和冲击 人体测试和实验的安全方面指南 第1部分：全身暴露于机械振动和重复冲击

This part of ISO 13090 provides guidance on the safety aspects of the design of equipment and the conduct of tests and experiments in the laboratory in which human subjects1) are exposed to mechanical vibration and repeated shock. This part of ISO 13090 is concerned with tests and experiments in which subjects are exposed to whole-body mechanical vibration and repeated shock, as described in ISO 2631-1. Local vibration is not within the scope of this part of ISO 13090, but some of the general procedures may be applicable. The experiments to which this part of ISO 13090 is applicable include those performed to determine the response of subjects to mechanical vibration and repeated shock stimuli. They also include those experiments in which mechanical vibration and repeated shock are part of the environment in which other investigations are performed, and to experiments or tests to compare the attributes of equipment intended to alleviate the effects of mechanical vibration and repeated shock on the user (e.g. testing of seat suspensions, seat cushions and other attenuating devices, including tests according to ISO 10326-1). NOTE Measures in addition to those described in this part of ISO 13090 may be necessary in those countries which have relevant national requirements.

Mechanical vibration and shock -- Guidance on safety aspects of tests and experiments with people -- Part 1: Exposure to whole-body mechanical vibration and repeated shock

NF E90-631-4/A1*NF ISO 2631-4/A1:2014 机械振动和冲击. 人体暴露于整体振动的评估. 第4部分: 固定导轨运输系统中乘客和船员舒适度的振动效果和旋转运动的评估指南. 修改件1

Le présent document amende la norme internationale ISO 2631-4, de 2001.

Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 4 : guidelines for the evaluation of the effetcts of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems - Amendment